The Emax-Hi is an absolute magnetic length measuring system with high-resolution. The sensor technology and the evaluation electronic are integrated in one housing. The magnetic tape is attached to a flat surface using the adhesive tape included in the delivery. Emax-Hi can be installed with a distance of up to 0.5mm from the magnetic tape (without cover tape).

ELGO's Emax-Hi Measuring System Image
FEATURES
  • High-resolution – up to 1 µm
  • Operation speed up to 10 m/s
  • Absolute measurement up to 8m
  • Direct, contactless and wear-free measurement
  • Various output interface available (SSI, CANopen (Ds406) and more
  • Additional incremental square-wave signals (A, B) or analog signal output Sin/Cos (1 Vss) in real-time for highly dynamic control (option)
  • High safety during installation and operation by visual (LED) and signal output error message in case the max. allowable reading distance to scale is exceeded
  • Typical applications: linear actuators, pick&place, medicine technology
MECHANICAL DATA
Measuring principleabsolute
Repaet accuracy± 1 increment
System accuracy µm at 20 °C± (10 + 20 x L), L = measuring length in meters
Distance sensor / tape0.1 … max. 0.5 mm, without cover tape
Sensor housing materialaluminium
Housing dimensions
(L x W x H)
70 x 16 x 30 mm
Required magnetic tapeAB20-10-10-2-R-11
Pole pitch1 mm
 Max. measuring length8 m
Type of connection12-pin M12 round connector (external)
Sensor cable5 m standard length as accessory, drag chain suitable, other cable lengths on request
Required sensor cable5 m: DKA-00-RCF0-050-XXXX-12-T-D-S
Sensor cable bending radiusmin. 60 mm
Weightapprox. 50 g without cable, cable (accessory): approx. 60 g/m

Want to see more of ELGO’s measuring systems? Click here. Alternatively, you can get in touch with our team at [email protected] | 01344 266530