Home / Elgo / ELGO LMIX2-000-10.0-1-00 Encoder, 10.0M Cable
ELGO LMIX2-000-10.0-1-00 Encoder, 10.0M Cable £ 200.57ex VAT
2 in stock (can be backordered)
£ 200.57ex VAT
LMIX2 Incremental Linear Encoder
ELGO LMIX2-000-10.0-1-00 Encoder:
10-30 VDC supply
HTL Output
10M cable length
2 in stock (can be backordered)
Description
MECHANICAL DATA of the ELGO LMIX2-000-10.0-1-00 Encoder:
Measuring principle
incremental
Repeat accuracy
± 1 increment
System accuracy in µm at 20 °C
± (25 + 20 x L), L= measuring length in meters
Distance sensor / tape
max. 2.0 mm
Sensor housing material
zinc die cast
Housing dimensions (L x W x H)
30 x 12.5 x 25 mm
Required magnetic tape
MB20-50-10-1-R
Pole pitch
5 mm
Max. measuring length
theoretically unlimited
Connections
open cable ends
Sensor cable
1.5 m standard length, others on request, drag chain suitable
Sensor cable bending radius
60 mm
Weight
approx. 35 g, each without cable, cable: approx. 60 g/m
ELECTRICAL DATA
Power supply voltage
10 … 30 VDC or 5 VDC
Residual ripple
10…30 VDC: <10 %, 5 VDC: ± 25 mV
Current consumption
10 … 30 VDC: max. 150 mA, 5 VDC: max. 200 mA
Output signals
A, A’, B, B’, Z, Z’
Output levels
HTL or TTL
Output current per channel
max. 20 mA
Resolution (at 4 edge evaluation)
0.025 mm
Index pulse
every 5 mm (periodically),
Max. output frequency per channel
100 kHz
Operating speed
5 m/s
Max. rotation speed
300.000 U/min per number of pole pairs
ENVIRONMENTAL CONDITIONS
Storage temperature
-25 … +85 °C
Operating temperature
-10 … +70 °C, -25… +85 °C on request
Humidity
95 %, non-condensing
Protection class
IP67
