ACS-120-1-SC00-VE2-PM | POSITAL Inclinometer, 1 Axis, ± 120°, 4-20 mA Output

£181.42 ex VAT

Available on back-order | Lead time 3-4 weeks

£181.42 ex VAT

ACS-120-1-SC00-VE2-PM | POSITAL Inclinometer

  • 1 Axis,
  • 120° measurement range
  • 4-20 mA Output
  • ±0.10° Absolute Accuracy, 0.01° Resolution

Available on back-order | Lead time 3-4 weeks

SKU: ACS-120-1-SC00-VE2-PM Category:

Description

General Specifications
Application 1-Axis Position Monitoring and Leveling
Measurement Range 120°
Absolute Accuracy ±0.10°
Resolution 0.01°
Electrical Specifications
Supply Voltage 10 – 30 VDC (See also Interface: Max Load Resistance)
Power Consumption (no load) ≤ 0.7 W
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
Reverse Polarity Protection Yes
MTTF 350 years @ 40 °C
Short Circuit Protection Yes
Environmental Specifications
Operating Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Storage Temperature -40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient 0.004°/ K
Protection Class IP66/IP67
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance 1.5 mm (10 Hz ? 58 Hz) & ? 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing Material Fibre-Reinforced PBT (Polybutylene Terephthalate)
Potting Material PUR (Polyurethane)
Weight 100 g (0.22 lb)
Interface
Interface Analog Current 4 – 20 mA + RS232
Teach In Zero Positioning, Inverse Direction, Elevation Range Programming
Settling Time 125 ms
Output Type Current 4 – 20 mA
Max Load Resistance 270 Ω @ 10 V DC (500 Ω @ 15 V DC)
Transmission Rate RS232: min. 1200 Baud; max. 115200 Baud
Default Transmission Rate RS232: 9600 Baud
Linearity ± 0.02%

 

Electrical Connection
Connection Type Connector M12
Connector M12, Male, 8 pin, a coded
Product Life Cycle
Product Life Cycle Established
Certification
Approval CE + cULus
Connection Plan
SIGNAL PIN NUMBER
Power Supply 1
GND 4
Z-Axis, Current Output 5
Set1 6
Set2 8
RxD 2
TxD 3
Not Connected 7
Dimensional Drawing

 

drawing-1e3-47x52-pm.png

Additional information

Output

Product Type

Measurement Range

# Axis