Emolice is please to introduce the IXARC magnetic rotary encoders for safety critical systems from POSITAL. The features include:

  • Redundant measurement elements
  • Certification to Safety Integrity Level 2 (SIL 2) and Performance Level d (PL d).
  • PROFINET communications interface
  • Support for the PROFIsafe protocol.

PROFIsafe-based control systems are used for critical applications such as industrial robots or material handling equipment, where loss of control could result in hazardous situations. The encoder transmits a safety position and/or safety velocity value.

At the heart of the encoder is company’s magnetic measurement technology; the sensing elements in these devices are more mechanically rugged than optical measurement systems and significantly more resistant to the presence of condensation and dust.
Therefore, with no direct contact between sensing elements, the encoders will retain their accuracy and reliability over long lifetimes. Versions with multi-turn capabilities have a 12 bit (4096 rotation) measurement range.

The measurement system is backed up by advanced signal processing and interface software that supports a full range of PROFINET and PROFIsafe capabilities, including prioritized startup, media redundancy and the possibility of firmware updates through the PROFINET communications network.

Built-in Ethernet bridging functionality makes it possible to make use of a variety of network topologies. System troubleshooting is simplified by the presence of LEDs that indicate the device’s operating status and help to isolate faults. Encoders are available in a wide range of mechanical configurations.

Saltwater-resistant aluminium housings also make these rotary encoders for safety critical systems suitable for use in harsh marine environments.
The IXARC encoder for safety critical systems from POSTIAL is available from Emolice now.